Huawei UPS5000-A-600K-SC User Manual page 187

UPS5000-A-(600 kVA-800 kVA)
User Manual (40 kVA)
3.
After you set network parameters, connect the UPS to the network over a network cable, which enables
you to remotely manage the UPS. If you do not need remote management, retain the default network
parameter settings.
4.
System parameter settings affect UPS operation. When you set system parameters, note the
following:
Issue 03 (2017-10-16)
Figure 5-4 Setting the date and time
On the Network Param. screen, set IP address allocation, IP address, Subnet mask,
and Gateway, as shown in
Figure 5-5 Network Param. screen
On the System Param. screen, select Single (default value) or Parallel, as shown in
Figure 5-6. Set the voltage level, output frequency, battery capacity, and the number of
batteries, as shown in Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-5. For details, see
5-7.
5 Operations
4.1.2.3 Settings Screen.
179