First Steps - Televes 717402 User Manual

6. First steps

After made all the connections, please plug the power
adapter .
The "Simple Installation" screen is activated automatically
and will guide you in configuring the menus and in
searching channels .
First you must select the language (Step 1) in which you
want to display on-screen menus .
- Select the language in which menus are displayed on
screen using the cursor keys
- Press OK to select and press the blue key to acess the
next screen .
On the next screen you must set your region (country)
where the receiver is installed .
- Select the country using the cursor keys
press the blue key to access the next screen .
Note: Location must be correct because of this data
depends a correct indication of the time displayed on the
menus .
Now, you can select the "Video Resolution" and the TV
"Aspect Mode" .
or .
In this screen you can select and edit all the satellites that
you want to be present at your installation .
Select the desired satellite displayed on screen using the
cursor keys , and press OK to confirm . It will be marked
with the following symbol:
or and
- Video Resolution - Select the desired video resolution
using the cursor keys or
are: By Source; By Native TV; 480i; 480p; 576i; 576p;
720p_50; 720p_60; 1080i_25; 1080i_30; 1080p_24;
1080p_25 and 1080p_30 .
- Aspect Mode - Select the desired format using the
cursor keys or . The available options are: Auto;
4:3PS; 4:3LB and 16:9 .
- Press the red key (of remote control) to edit an existing
satellite .
- Press the green key (of remote control) to add a new
satellite .
- Press the yellow key (of remote control) to delete an
CH
existing satellite .
VOL
- Press the blue key to confirm the values and continue .
CH
. The available options
VOL
9
EN