Table of Contents
Advertisement
5.
Polarity: In "Polarity" item, please press
to switch between the follwing options: "Auto", "H"
and "V" .
Motor Antenna
If you select "Motor Antenna" in "Antenna Connection"
menu, there will display the screen like below:
1.
LNB Freq: In this item, press
between the parameters: 5150; 5750; 5950; 9750;
10000; 10050; 10450; 106 00; 10700; 10750; 11250;
11300; 5150-5750; 5750-5150; Universal (9750-
10550); Universal (9750-10600); Universal (9750-
10700); Universal (9750-10750) .
Motor Type: Please select between: "DiSEqC1 .2" or
2 .
"USALS" .
Local Longitude/Local Latitude: If you select
3 .
"USALS", "Local Longitude / Local Latitude" is
available . Press OK and number key to input .
4 .
Delete All: This operation will delete all satellite
positions . It will display a dialogue "Are you sure..." .
If you select "Yes", it will clear all position . Select "No"
to cancel the operation . This item is only valid in
"DiSEqC1 .2" Mode .
5 .
Motor Type: If you select "DiSEqC1 .2", "Local
Longitude / Local Latitude" is not available . It will
show the screen like below:
key or OK key to change satellite or
•
Press
/
transponder .
•
Position No .&Save: Press
select or input Position No .
Go to X: Press OK key to open a list . You can go to X
•
/
key
/
key to select
/
key or number key to
or go to reference .
•
After select "Satellite" and "Position No & Save", you
can move the highlight to "West/Save/East" line and
to move the dish and press OK to save
press
/
the position .
Move the highlight to "Recalculation" and press OK
•
key to recalculate .
•
Set the satellite's longitude and local longitude /
local latitude, USALS can move dish automatically .
Move the highlight to "Motor Setting" and press OK
key, it will show the screen like below:
Switching the satellite to move the dish to the right
place .
6 .
Limit Setup:
•
When you set "limit setup" to "West Limit/ East
Limit", you can move the highlight to "Limit Setup"
line and move the dish to west or east by pressing
/
key manually .
When you are moving to the target place, press OK
•
key to save the point .
17
EN
Advertisement
Table of Contents
