Table of Contents
Advertisement
High Definition Satellite Receiver
9.2 Satellite List
When you enter to "Satellite List" menu, there will display
the screen like below: (Press OK key to select satellite) .
Press Red key, to enter edit satellite menu . You can
1 .
edit Satellite name and satellite longitude .
2 .
Press Green key, to enter add satellite menu .
Press Blue key, will appear: "Are you sure to delete?" .
3 .
Select "Yes" to delete the satellite that highlight
focus on . Select "No" to cancel the operation .
9.3. Antenna Setup
Fixed Antenna:
If you select "Fixed Antenna" in "Antenna Connection"
menu, there will display the screen like below:
In Antenna Setup mode:
1.
Satellite: In this item, press
Satellites and press OK key to enter satellite list for
you select directly .
2.
LNB Freq: In this item, press
parameter . The options available are: 5150; 5750;
5950; 9750; 10000; 10050; 10450; 10600; 10700;
10750;
11250; 11300; 5150-5750; 5750-5150;
Universal (9750-10550); Universal (9750-10600);
Universal (9750-10700); Universal (9750-10750);
Unicable (9750-10600); Unicable (10200-10200);
JESS (9750-10600) .
3.
DiSEqC1.0: You can use
There are several options for your selection: Disable
/ Port1 / Port2 / Port3 / Port4 .
4.
22K: You can use
When this item is switched to ON", receiver will
receive TV and radio input signal from 22K port . If
the item is switched to "Off", the receiver will receive
all signal from 0K port .
Note: If you choose LNB Freq . "Universal", you
cannot modify 22K .
/
key to switch
/
key to select the
/
key to switch options .
/
key to switch "ON / Off" .
16
Advertisement
Table of Contents
