Satellite Setup - Televes RSD - 7296 User Manual

User Manual User Manual

9.3.- Satellite Setup

This Menú lets you modify the specifications concerning a satellite posi-
tion. To do this, press OK over the -Satellite Setup- option. In the sub-
menu that appears you can carry out a channel scan, modify the exis-
ting channels, eliminate those that do not interest you or edit the satelli-
ne name.
Scan:
- Satellite name: Select one of the satellites that have been pre-pro-
grammed into the receiver using the
activate the pop-up Menú.
- LNB number: Assign an LNB number to that satellite. The LNB num-
ber depends on those created in the "LNB Setup" section.
- FTA/All: Indicate if you want to scan all of the satellite channels (ALL) ,
only the free-to-air channels (FTA), only TV channels or only Radio
channels.
- Organised by: This lets you organise the channels that have been
found by the satellite into alphabetical order (A to Z) or backwards
(Z to A).
Press the OK button to save the data.
In the confirmation window that appears, indicate if you want to carry
out the scan (YES) or if you want to cancel the operation (NO).
During the scan, if you press the EXIT button, a small window will appear
where you must indicate what you would like to do with the scanning
operation:
- Skip: Eliminates all the data found until the cancellation command and
saves the rest.
- Cancel: Eliminates all the data found in the satellite.
- Continue: Continues to search for data.
Edit:
This lets you change the LNB that has been assigned to a satellite.
Select one of the active satellites with the
OK.
The cursor will appear on the "LNB Number" option so that you can
select which number you require using the
Press the OK button to save the data.
, buttons or press OK to
or buttons and press
or buttons.
61
"RSD - 7296" "RSD - 7296"