Download Print this page

IEI Technology WAFER-ULT-i1 Quick Installation Manual page 3

3.5" sbc supports intel 22nm 4th/14nm 5th generation mobile core i7/i5/i3 and celeron on-board processor ult, vga, lvds, idp, dual gbe, pcie mini, usb 3.0, sata 6gb/s, audio, iris-1010 and rohs
Hide thumbs Also See for WAFER-ULT-i1:

Advertisement

 Display Output:
Triple independent display
VGA (up to 2560x1600@60Hz)
18/24-bit dual-channel LVDS by CH7511B DP to LVDS
converter (up to 1920x1200@60Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP
(up to 3840x2160@60 Hz)
 Ethernet:
GbE1: Intel® I218LM PHY with Intel® AMT 9.0 support
GbE2: Intel® I210-AT PCIe controller with NCSI support
 Super IO: Fintek F81866
 Extemal I/O Interfaces:
1 x RS-232
2 x USB 3.0
 Internal I/O Interfaces:
1 x KB/MS (1x6 pin)
1 x RS-422/485 (1x4 pin, P=2.0)
2 x RS-232 (2x5 pin, P=2.0)
2 x SATA 6Gb/s with 5V power connector (no RAID)
2 x USB 2.0 (2x4 pin, P=2.0)
 iRIS Remote Management Module: 1 x iRIS-1010 slot
 Expansion:
1 x Full-size/half-size PCIe Mini card slot (mSATA support)
 Audio:
1 x Analog audio (2x5 pin)
 Front Panel:
1 x Power LED & HDD LED (1x6 pin)
1 x Power button (1x2 pin)
1 x Reset button (1x2 pin)
 LAN LED:
2 x LAN LED (1x2 pin)
2

Advertisement

loading

This manual is also suitable for:

Wafer-ult2-i1