Connections And Terminal Designation - Siemens SITOP series Operating Instructions Manual

Description, device design, dimension drawing

2.2 Connections and terminal designation

2.2 Connections and terminal designation
The line input terminals
The output terminals
Installation (Page 33)).
Connections and terminal designations for 6EP1333-3BA10 and 6EP1334-3BA10
①
②
②
⑩
*1)
Figure 2-2
10
①
②
are used to connect to the loads to be supplied (see also Section
Line input L1, N (L2), PE
Output +
Output –
Signaling contact 13, 14
Do not subject the end stop to higher loads
Terminal data for 6EP1333-3BA10 and 6EP1334-3BA10
can be used to establish the connection to the supply voltage.
One screw terminal each
2 screw terminals
2 screw terminals
One screw terminal each
Operating Instructions, 06.2014, C98130-A7548-A1-3-7629
SITOP modular 1ph/2ph