Auto-Off; Interface Rs 232 C; Technical Data; Description Of The Jack - KERN 572 Operating Instructions Manual

4.10.5 Auto-off

The Auto-off function turns off the balance after nearly 60 seconds when it is not used.
Activation of the Auto-off function:
Auto-off
1. Press MODE-key repeatedly until display shows:
2. Press YES to select Auto-off
3. Press NO to deselect Auto-off
4. Press MODE-key repeatedly until the balance displays in
grams again, or press TARE-key.

5 Interface RS 232 C

5.1

Technical Data

8-bit ASCII Code
1 start bit, 8 data bits, 1 stop bits, no parity bit
Baud rate adjustable to 600, 1200, 2400, 4800 and 9600 baud (default)
Miniature DIN plug is necessary type MP-371/C 7
When working with an interface correct operation is secured only if the corresponding
KERN-interface-cable (max. 2m) is used.
5.2

Description of the jack

572/KB/DS-BA-defsi-0246
Waagenanzeige
Pin 2: transmit data
Pin 3: receive data
Pin 5: signal ground
Auto-off?
Auto-off?X
Auto-off?
0,0 g
35