Automatic Data Transfer <Auto; Continuous Data Transfer <Cont - KERN PCJ Series Operating Instructions Manual

15.3.3 Automatic data transfer <auto>
Data transfer takes place automatically without pressing the PRINT button provided
the appropriate transfer conditions are met depending on the menu setting.
Function enabling and transfer condition setting:
In the setup menu, display the <Print  PrMode  < trig > menu

item and confirm, pressing ➔.
To transfer data automatically, using navigation buttons , choose the

<auto> menu item and confirm by pressing ➔.
 Use the navigation buttons  to choose the setting <on> and confirm by
pressing ➔. The <zRange> symbol will be displayed.
Confirm by pressing ➔ and use the navigation settings  to set the required

transfer condition.
 Confirm pressing ➔.
 To leave the menu, press the navigation button  several times.
Placing the weighed material:
 Whenever required, place an empty container on the scale and tare it.
 Place the weighed material and wait until the stabilization indicator is displayed (
).
The weighing value will be transferred automatically.
15.3.4 Continuous data transfer <cont>
Function enabling and transfer cycle setting:
In the setup menu, display the <Print  PrMode  < trig > menu item

and confirm, pressing ➔.
To transfer data continuously, using navigation buttons , choose the <cont>

menu item and confirm by pressing ➔.
 Use the navigation buttons  to choose the setting <on> and confirm by press-
ing ➔.

The <speed> symbol will be displayed.
 Confirm by pressing ➔ and using the navigation buttons, , set the required
cycle (for introducing the numerical value, see chapter 0).
 To leave the menu, press the navigation button  several times.
Place the weighed material.
 Whenever required, place an empty container on the scale and tare it.
 Place the weighed material.
 The weighing values will be transferred in line with the predefined cycle.
TPCJ-BA-e-2310 63