Options; Printer; Important Notice - KERN 572 Operating Instructions Manual

6 Options

6.1

Printer

With the serial data output RS 232 a printer can be connected.
The printout shows the weight in grams. When the counting mode is selected the number of
pieces or the weight is printed.
When the percent mode is selected, the percentage or the weight will be printed.
Press The PRINT-key to print weighing results.
Select the enumerator to number the weighing continuously.
Turn off the balance or use the CLEAR function to Reset the enumerator to (000)

Important Notice

7
These electronic scales are a precision instrument. Electromagnetic fields can cause major
display discrepancies. The scales must then be repositioned away from electromagnetic
fields. All sources of environmental interference, such as drafts and vibrations, should be
avoided. Sudden changes of temperature should be avoided. The scales must be reset to
match changes in temperature.
The scales are not hermetically sealed, therefore avoid high humidity, steam and dust. Do
not bring liquids into direct contact with the scales, as these can penetrate into the
measuring mechanism. Cleaning material should only be dry or barely damp. Do not use
solvents as these can damage paintwork or other plastic parts. Remove damaged items
immediately from the scales.
The measuring mechanism will be stabilised by allowing the scales to warm up for a few
minutes after switching them on. Place items to be weighed carefully on the scales. Do not
place objects on the weighing platform for any period of time, apart from normal use.
Sudden shocks or overloading the scales beyond the maximum permitted weight should
absolutely be avoided, balance could be damaged.
In case of problems operating the weighing program, switch the scales briefly off and on.
The weighing set-up must then be restarted right from the beginning.
Never operate the scales in areas where there is a danger of explosion, the models in this
series are not protected against explosion.
Check the scales regularly against, known, external test weights.
Opening the scales or failing to use them in accordance with the written instructions
will invalidate the warranty.
Please keep all packaging material for possible return of the scales. Scales must only be
returned in their original packaging.
38 572/KB/DS-BA-defsi-0246