Installation; Unpacking; Power Supply/Mains Operation; Description Of Keyboard Functions - KERN 572 Operating Instructions Manual

3 Installation

3.1

Unpacking

Take the balance carefully out of the packing. Take off plastic wrap. Install the balance at
the place intended for use.
Please retain all items of packaging in case of any future transit requirements. Check the
unit immediately for any visible transit damage and check that all accessories are included.
Standard accessories:
572/KB
Balance with a weighing plate of high-
-
grade steel
Adapter
-
Adjusting weight
-
Operating instructions
-
3.2

Power supply/Mains operation

Compare the voltage at the mains adapter with the mains voltage of the supply socket! The
balance may only be connected to the mains unit provided. The supply socket must be
earthed in accordance with electrical codes. Testing is only permitted by approved
specialist electrical companies.
3.3

Description of keyboard functions

Key
ON/OFF
PRINT
REF
MODE
<-> g
UNIT
TARE
YES
NO
26
Function
Switch balance on and off
Print a weighing result (when printer connected)
- Determine the set reference (in counting mode resp. Percent
mode).
1. "CAL" adjusting
2. Printer -->2400 Bd, 4800 Bd, 9600 Bd, 19200 Bd. Enumerator,
AUTOPRINT; AUTOPRINT PC.
3. "Count" parts counting
4. "%" Percent determination
5. Variable Factor
6. "Fast" (1 – 5)
7. "Autotare"
8. "Auto off" automatic shutoff
9. "Test" (for service only)
Switch pieces/percent to weight and back.
Net/Total Function
Unit Conversion + Variable Value
Tare, set display to zero
Confirm in MODE programme/ Fast setting
Delete in MODE-programme/Fast setting
DS
Weighing bridge
-
Analyse instrument
-
Adapter
-
Operating instructions
-
572/KB/DS-BA-defsi-0246