Net-Total Weighing; Printout Of Weighing Results - KERN 572 Operating Instructions Manual

•
What is the piece's weight in grams?
Press the <->-g-key to switch over the display between percent and weight
-
display. The former reference 100 % remains still active.
4.8

Net-total weighing

Useful when a mixture of several components will be weighed in a tare cup, and finally the
sum weight of all components weighed in will be needed for control (net-total, i.e. without
the weight of the tare cup).
Net-total weighing
1. Put tare cup on the weighing plate,
confirm with TARE-key
2. Weigh in component I (for instance 50,0 g)
↔
tare with g-key
3. Weigh in component II (for instance 20,0 g)
↔
Press g-key
The total weight of component I and II will be indicated
↔
4. Tare with g-key
5. Etc. ...
Return with the TARE-key to the weighing mode.
4.9

Printout of weighing results

The PRINT-key serves to print weighing results when a printer is connected. The printout
shows the weight in grams and also the number of parts when the COUNT-Mode is
selected or in percent when the percent mode is selected (see also section 4 Interface).
32
NET 20,0 g
SUM 70,0 g
572/KB/DS-BA-defsi-0246
Display
0,0 g
50,0 g
NET 0,0 g
NET 0,0 g