Advertisement
HOW TO USE THE REMOTE CONTROL
The LZR-i30 locks the remote control features out after 30 minutes of idle time. To restore
remote control access, cycle power to sensor.
After unlocking, the red
LED flashes and the sensor
can be adjusted by remote
control.
ADJUSTING ONE OR MORE PARAMETERS
CHECKING A VALUE
RESTORING TO FACTORY VALUES
SAVING AN ACCESS CODE
The access code is recommended for sensors installed close to each other.
DELETING AN ACCESS CODE
Enter the existing code
Page 4 of 12
Page 4 of 12
If the red LED flashes quickly after unlocking, you
need to enter an access code from 1 to 4 digits.
To end an adjustment session,
always lock the sensor.
x
X = number of flashes = value of the parameter
= field width: 13.7 ft
4x
1x
2x
= field width is defined by teach-in
3x
teach-in
75.5667.10 LZR-I30 20161212
75.5667.10 LZR-I30 20161212
30'
Advertisement
