Danfoss VLT FC Series Operating Instructions Manual page 45

Electronically Controlled B...
Terminal functions are programmed in parameter group 5-
** Digital In/Out. (See Table 6.2 for factory default
parameter settings for drives with an ECB). Bypass
functions are programmed in parameter group 31-**
Parameter
5-01 Terminal 27 Mode
5-02 Terminal 29 Mode
5-10 Terminal 18 Digital Input
5-11 Terminal 19 Digital Input
5-12 Terminal 27 Digital Input
5-31 Terminal 29 Digital Output
5-40 Function Relay (0)
5-40 Function Relay (0)
Table 6.2 Parameter Group 5-** Digital In/Out Factory Default Settings
Option Panel Operating Instructions
Bypass Option (see 6.1.7 ECB Mode of Operation). See the
drive's supporting materials for detailed programming
instructions.
Setting title
Input
Output
Start
Run Permissive
External Interlock
No Alarm
Start Command Active
Off Delay
®
MG14I102 - VLT is a registered Danfoss trademark
Setting Function
0 Customer Interlock
1 Auto bypass
8 Common run/stop
52 Run Permissive
7 Customer Interlock
160 Auto bypass
167 Run Permissive
0.00 S Run Permissive
6 6
43