Dmx Operation - ADJ PAR Z120 RGBW User Instructions

PAR Z120/ZP120 RGBW
Factory Restore
Select the , press the ENTER button. Use the DOWN and UP button to
select 0‐9999. To restore the unit to factory settings, enter the password, "11"
and press the ENTER button.
PAR Z120/ZP120 RGBW
Universal DMX Control: This function allows you to use a universal DMX-512
controller to control the dimmer, fine dimmer and strobe. A DMX controller
allows you to create unique programs tailored to your individual needs.
1. The PAR Z120/ZP120 RGBW has 3 DMX channel modes; 1-channel
mode, 2-channel mode and 3-channel mode. See page 17 for a detailed
description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures on pages
11-14 as well as the set-up specifications that are included with your DMX
controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 9 to select your DMX channel mode and
set your desired DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last
fixture.
7. For help operating in DMX mode consult the manual included with your
DMX controller.
PAR Z120/ZP120 RGBW
To adjust the beam angle
slide the beam angle adjuster
located inside/in front of the
lens. See diagram below.
The beam angle can be
adjusted manually, between
7°/11.5°/16°/20.5°/25°.
ADJ Products, LLC Ÿ ww.adj.com
Ÿ
PAR Z120/ZP120 RGBW User Instructions Page 15
Menu and Functions

DMX Operation

Beam Angle Adjustment