ADJ PAR Z120 RGBW User Instructions page 3

©2018 ADJ Products, LLC all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ADJ Products, LLC logo and identifying product names and numbers herein are
trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms
and matters of copyrightable materials and information now allowed by statutory or
judicial law or hereinafter granted. Product names used in this document may be
trademarks or registered trademarks of their respective companies and are hereby
acknowledged. All non-ADJ Products, LLC brands and product names are
trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to
any persons, and direct or indirect economic loss associated with the use or
reliance of any information contained within this document, and/or as a result of
the improper, unsafe, insufficient and negligent assembly, installation, rigging,
and operation of this product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
included instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
methods:
Reorient or relocate the device.
•
Increase the separation between the device and the receiver.
•
Connect the device to an electrical outlet on a circuit different from which the
•
radio receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the environment. Please turn
off all electrical products when they are not in use. To avoid power
consumption in idle mode, disconnect all electrical equipment from power
when not in use. Thank you!
ADJ Products, LLC Ÿ ww.adj.com
Ÿ
PAR Z120/ZP120 RGBW User Instructions Page 3