ADJ PAR Z120 RGBW User Instructions page 10

PAR Z120/ZP120 RGBW
5-Pin XLR DMX Connectors. This unit use 5-pin DMX-512 data cables for
DATA transmission. 5-pin DMX fixtures may be implemented in a 3-pin DMX
line. When inserting standard 5-pin data cables in to a 3-pin line a cable
adaptor must be used, these adaptors are readily available at most electric
stores. The chart below details a proper cable conversion.
Conductor
Ground/Shield
Data Compliant (-signal)
Data True (+signal)
Not Used
Not Used
ADJ Products, LLC Ÿ ww.adj.com
3-PIN XLR TO 5-PIN XLR CONVERSION
3-Pin XLR Female (Out)
Pin 1
Pin 2
Pin 3
Ÿ
PAR Z120/ZP120 RGBW User Instructions Page 10
DMX Set Up
5-Pin XLR Male (In)
Pin 1
Pin 2
Pin 3
Pin 4 – Do Not Use
Pin 5 – Do Not Use