Dmx Set Up - ADJ PAR Z120 RGBW User Instructions

PAR Z120/ZP120 RGBW
DMX 512 Address Setting
Press the either the MENU, UP, or DOWN buttons until
press ENTER.
The current address will now be displayed and flashing. Press the UP or DOWN
buttons to select your desired address.
Channel Mode – Select your desired DMX channel mode.
Press the MENU button until
DMX channel mode will be displayed.
Press the UP or DOWN buttons to find your desired DMX channel mode and
press ENTER to confirm and exit.
DMX State -
event that the DMX signal is lost, interrupted, or power is lost, the
operating mode chosen in the setup is the running mode the fixture will go
into when the DMX signal is lost. You can also set this as the operating
mode you would like the unit to return to when power is applied
Press the MENU button until
DOWN and UP button to select (Blackout) /or
Color Macro) or
choice will begin to flash. Use the UP or DOWN buttons to choose an operating
mode you would like the unit to start up in when power is applied or the DMX
signal is lost.
• BLND (Blackout) - If the DMX signal is lost or interrupted, the unit will
automatically go into stand by mode.
• HOLD - If the DMX signal is lost the fixture will stay in the last DMX setting. If
power is applied and this mode is set, the unit will automatically go into the last

DMX set up.

Press ENTER to confirm and exit.
ADJ Products, LLC Ÿ ww.adj.com
Press ENTER to confirm and exit.
is displayed and press ENTER. The current
This mode can be used as a precaution mode. In the
is displayed and press ENTER.
(Hold the last state).
Ÿ
PAR Z120/ZP120 RGBW User Instructions Page 12
Menu and Functions
is displayed,
(Automatic Operation
Press ENTER and the bottom
Use the