Instrutech The Hornet IGM402 User Manual page 25

Instruction Manual
SETUP CGS (continued)
- SETUP CG 1 [Press Enter key here to see the following choices]

SET VAC [Factory default = 0.00E+0 TORR]

SET ATM [Factory default = 7.59E+2 TORR]

ANALOG TYPE [Factory default = LOG-LINEAR]
- SETUP CG 2 [Press Enter key here to see the following choices]

SET VAC [Factory default = 0.00E+0 TORR]

SET ATM [Factory default = 7.59E+2 TORR]

ANALOG TYPE [Factory default = LOG-LINEAR]
ANALOG OUTPUT
- IG ANALOG CAL [Factory default = Factory Set]
- CG1 ANALOG CAL [Factory default = Factory Set]
- CG2 ANALOG CAL [Factory default = Factory Set]
SETUP COMMS
- BAUD RATE [Factory default = 19200, 8, N, 1]
- ADDR [Factory default = 1]
- ADDR OFFSET [Factory default = 0]
- FORMAT [Factory default = BINARY]
SERVICE MENU
- INFO [Factory default = FIRMWARE VERSION]
- OP TIME [Factory default = Displays to-date operating time]
InstruTech
IGM402 Hornet
Page 23