Instrutech The Hornet IGM402 User Manual page 2

NOTICE
This User Manual is applicable to the InstruTech® Hornet™ model IGM402 product
manufactured with firmware p/n 2444 versions 100 or higher.
manufactured prior
http://www.instrutechinc.com/downloads-archived-user-manuals/
to prior versions of IGM402. See
version of your IGM402.
Important User Information
electromechanical equipment. Because of these differences, and because there are a variety of uses for solid state equipment, all
persons that apply this equipment must take every precaution and satisfy themselves that the intended application of this equipment is
safe and used in an acceptable manner.
In no event will InstruTech be responsible or liable for indirect or consequential damages that result from the use or application of this
equipment.
Any examples or diagrams included in this manual are provided solely for illustrative purposes. Because of the many variables and
requirements imposed on any particular installation, InstruTech cannot assume responsibility or liability for any actual use based on the
examples and diagrams.
No patent liability is assumed by InstruTech with respect to use of information circuits, equipment, or software described in this manual.
Throughout this manual we use notes, notices and apply internationally recognized symbols and safety messages to make you aware of
safety considerations.
hazards which, if precautions are not taken, could result in death or serious injury, property damage, or economic loss.
CAUTION
WARNING
Ccc
hazards which, if precautions are not taken, could result in minor or moderate injury, property damage, or economic loss.
WARNING
NOTICE
SHOCK HAZARD
WARNING
Ccc
WARNING
p/n 000861-116
to the introduction
section 5.8.7, SERVICE MENU
There are operational characteristic differences between solid state equipment and
Identifies information about practices or circumstances that can cause electrical or physical
Identifies information about practices or circumstances that can cause electrical or physical
Identifies information that is critical for successful application and understanding of the product.
Labels may be located on or inside the device to alert people that dangerous
voltages may be present.
For previous versions of IGM402
of firmware p/n
to find the version of user manual applicable
of this manual to determine the firmware
2444-100, please go to