Id Tag: Model V700-D23P41; Dimensional Drawing And Specifications - Omron V700-D23P41 User Manual

Section 2
Unit Specifications

2.5 ID tag: Model V700-D23P41

2.5.1 Dimensional drawing and specifications

General specifications
Characteristic
Memory capacity
Memory type
Data retention time
Number of overwrites
Operating ambient temperature
Operating ambient temperature
Storage ambient temperature
Operating ambient humidity
Protection rating( IEC 60529)
Vibration resitance
Shock resistance
Materials
Mass
Dimensional drawing
The ID tag Model V700-D32P41 has directionality, and its communication performance varies
depending on how it is oriented. Therefore, be sure to use it in correct orientation.
V700-L21
34
User's Manual
35 to 95%RH (no dew condensation)
Endurance 10 to 2000 Hz, single amplitude 0.75 mm
Acceleration of 150 m/s 2 is applied in each of X, Y and Z directions each for 15 minutes, and
this sequence is repeated 10 times, thereby the ID tag must not develop any irregularity.
An impact, that is, acceleration of 500 m/s
directions, and this sequence is repeated 18 times, thereby the ID tag must not develop any
irregularity.
Case: PBT resin, filler: epoxy resin
Approx. 1 g
R1
Toward IDRW head
Specification
240 bytes (user area)
EEP-ROM
10 years after data writing
100,000 times per address
−25 to +70°C (no freezing)
−40 to +110°C(no freezing)
−40 to +110°C (no freezing)
IP67
2 , is applied three times in each of X, Y and Z
25 0.1
R0.25