Idr/W Head: Model V700-Hmd11-1; Names And Functions Of Various Components/Specifications - Omron V700-D23P41 User Manual

Section 2
Unit Specifications

2.4 IDR/W head: Model V700-HMD11-1

2.4.1 Names and functions of various components/specifications

Status indicators (located on sideplate)
Antenna section
This section reads or writes data from or into an ID tag.
I/F connector
This interface connector supplies power to IDR/W head, and permits data transmission with an
upstream controller.
Status indicators
Green Remains lit during data transaction with an ID tag.
Red Lights if data transaction with an ID tag has failed to complete normally.
General specifications
Characteristic
Supply voltage
Current consumption
Dimensions
Cable length
Protection class
Operating ambient temperature
Operating ambient humidity
Storage ambient temperature
Storage ambient humidity
Mounting system
* Be sure to ground the sheet metal that accepts the IDR/W head by class D earth work (grounding
resistance of 100 Ω or less, diameter of grounding conductor of 1.6 mm or greater).
V700-L21
30
User's Manual
Communication area
Antenna section
Specification
5 VDC±5%
250 mA max.
40 × 53 × 23 mm
1 m (dia. 6 mm)
IP67 (per IEC 60529)
IP67G (per JEM 1030)
−10 to +55°C
25 to 85%RH
−25 to +65°C
25 to 95%RH
Screwed down at two points
with M4.
I/F cable
1m
Comment
Supplied from the I/F connector
When 5 VDC is input: approx. 4 A with rush current
Except for cable
Can be extended to 4 m in conjunction with Model V700-L11
The connector is not resistant to water or oil.
No freezing
No dew condensation
No freezing
No dew condensation
Capable of mounting to sheet metal*
I/F connector