Front Bay; Exterior Painting; Assemble The Front Bay; Glue And Tape Together The Bay Foundation - Real Good Toys Victoria’s Farmhouse Instructions Manual

Instructions for Special Edition Kit #JM-1065 Victoria's Farmhouse

Exterior Painting:

Finish all of the Exterior painting now!
III. Assemble the Front Bay:
c 1. Lay the house assembly on its Back. Glue
the Gable Foundation to the front of the house's
foundation, lined up on the left. Let the glue dry.
Do Step 2 to Step 4 without stopping
2. Glue and tape together the Bay
c
foundation (Illustration #1).
c 3. Glue and tape the Bay Base Floor to
the front edge of the house's Base Floor,
inside the bay cutout in the Gable Front (Il-
lustration #2). Make sure the floor surface
across the joint is tight and smooth.
c 4. Glue and tape the Bay Founda-
tion set to the Bay Base Floor and to
the Gable Foundation. The foundation
extends past the Bay Base evenly on all
edges (this is a ledge to hold the bottom
of the Bay Walls).
Bay Base Floor
House Foundation
Gable Foundation
c 5. Tape the Bay wall sets together
at the corners (Illustration #4). Test
them on the house wrapped around
the Bay Floor, and adjust if necessary.
Glue the Bay walls together, to the
Bay Base Floor, and to the foundation
(Illustration #5).
6. Glue and tape the Bay Top
c
to the housebody and Bay, spaced
evenly all around (pg 1 photo).
Clapboard surface is
on the outside
Illustration #4
overlook the
Gable Foundation
Bay Foundation
Bay
Vertical
Bay Side wall set
Bay Front wall set
Caution!
Don't
Illustration #2
Glue and Tape the Bay Base Floor to the
Front Edge of the House's Base Floor
Bay Foundation
Clapboard
Illustration #3
Glue together the
Bay Wall Sets
Bay
Vertical
Clapboard
Front Bay (3) page 12
Illustration #1
Glue and Tape Together
the Bay Foundation
Gable Foundation
Illustration #5
Glue the Bay Walls Together, to the
Bay Base Floor, and to the Foundation