Paint; Housebody; Pre-Assembly; Stain The Shingles - Real Good Toys Victoria’s Farmhouse Instructions Manual

Instructions for Special Edition Kit #JM-1065 Victoria's Farmhouse
Square the corners
of the window, door, and stair holes with a utility knife - each
cutout has a rounded corner left over from the tool that made it. Make two cuts in
each corner from the outside (one from each direction), then cut from each direc-
tion on the inside to cut away the rounding in the corner so the window, door, or
stairs will fit.
A Double-Cut Coarse file is
easier for many people to use
when squaring the corners.
Make several strokes from each
direction in each corner and test
the Window or Door to see how
it fits.

Stain the Shingles:

Our pro uses Real Good Toys' Shingle Dye
(available through your Real Good Toys miniature dealer) when dying
the shingles for this house. Batch dye or stain the shingles several
days ahead of time so they will be dry when the time comes to use them
(instructions are with the shingle dye).
c 1. Assemble the Front Steps
Glue together the Front Steps lined up on the back edge and
both ends
2. Assemble the Chimney:
c
Caps, centered. Turn the Caps up-side-down; glue
the Chimney Block to the Caps, centered.
c 3. Assemble the Bay Wall sets
2) Bay Verticals and 2) Bay Walls (1
See page 12
view from the top
Make two Bay Side wall sets
This is the Outside
Make one Bay Front wall set
This is the Outside
A: Getting Started:
Do these things before the house assembly

Pre-Assembly

( 5 / mdf) 5 x 2 and 5 x 1
8
Glue together the
; each set is
3 / or 3 1 / " long)
4 2
Bay Wall
This is the Outside
Bay Vertical: ( 3 /
8
Bay Wall
:
) 9 7 / x 3 / , Bev.
32 4
Clapboard Pro le
Paint (B) / Housebody (1) page 6
Clapboard Pro le
Clapboard Pro le
Like this!