Interior; Assemble The Stairs - Real Good Toys Victoria’s Farmhouse Instructions Manual

Instructions for Special Edition Kit #JM-1065 Victoria's Farmhouse
Finish the Inside...Plan Ahead!
Interior finishing involves so many choices!
Will this house be a play-house or a display for
miniatures? What accessories will be used and
where will they go? Wiring? Wallpaper? Tile
or carpeting? Every choice makes a difference
in the order of finishing. Real Good Toys has
provided materials for some basic interior work,
but you may choose to do it differently.
Make your choices
Get your materials
Test your layout
With the pieces in your hands, imagine the
steps to get to where you want to be.
Now you're ready for your order of interior finishing.
Here's the order that our assembly pro follows for
tackling most custom interior finishing:
• Dividers
• Electrical wiring (using "tape" style wiring)
• Ceilings
• Floors
• Wallpaper
• Interior Window and Door Trim
• Stairs
• Baseboard and crown moldings
See www.realgoodtoys.help
Top Stair Block
Bottom Stair Block
Stringer
Bottom Bevel
Cut
Top Bevel
out glue, test the Stair assembly in the stair hole. The stairs are
tight to the wall and the top tread is flush with the floor.
wallpapering are done.
Middle Bevels
Stringer to extend just past the edge of the bottom stair tread.
Glue the Stringer to the side of the Stair assembly for support.
Photos of builder's interiors are available at
www.victorias-farmhouse.com
"Blind"
Divider
9" x 2 1 / "
2
"Blind"
Divider
9" x 2 1 / "
2

Assemble the Stairs:

1. Glue the Bottom and Top Stair Blocks together. With-
Wait to permanently install the stairs until flooring and
Glue the stair assembly in place. Let dry. Trim the
You have finished the Dollhouse Assembly
part of your project...
ENJOY THE REST
Interior (10) page 25
Divider
9" x 14 1 / "
8
1 Floor Layout
st
Divider
9" x 14 1 / "
8
2 Floor Layout
nd