Detail Of Overlaps; Gable Front Overlaps The Gable Left Side; Glue And Tape The Gable Front And Gable Left Side To The Base - Real Good Toys Victoria’s Farmhouse Instructions Manual

Instructions for Special Edition Kit #JM-1065 Victoria's Farmhouse
2. Glue and tape the Gable Front to the Gable
Left Side panel (the Front overlaps the Side), with the
grooves perfectly lined up (use a divider to make sure
the grooves line up) see Illustration #5. Let the glue
dry.
3. Glue and tape the Gable Front and
Gable Left Side assembly to the Base Floor,
straight and tight (Illustration #6). The Base
Floor sets into the Base Floor's groove in the
walls
Use lots of tape to make the walls hold tight
to the Floor in the grooves.
Step 4

Detail of overlaps

Right Front
Right Side
4. Glue and tape the first floor walls in
place (the Gable Right Side, Right Front, and
Right Side walls) following the perimeter
tracing (Illustration #8).
Base Floor
(temporary)
Divider
fits here
Stair hole or tracing
lines up with this edge
of the Gable Side
Illustration #6
Glue and tape the
Gable Front & Gable
Left Side to the Base
Floor
Gable Front
Gable Right
Side
Lined up and taped at the back edge
Housebody (1) page 9
Illustration #5
Gable Front Overlaps
the Gable Left Side
The Grooves are
Lined up
Gable
Left Side
Illustration #8
Glue and Tape the 1st
Floor Walls in Place