Data-Hold Function; Activate Function; Hold / Delete Result Of Density Determination On Display - KERN ACS-A03 Operating Instructions Manual

6 Data-Hold function

The data hold function may be activated during the density determination of solid
matter as well as during the density determination of fluids.
The displayed density value quite often fluctuates and is hard to read. By enabling
the data hold function, the density value will be kept on display after stationary
control until the UNIT key is operated.
6.1

Activate function

1. Call up menu:
In weighing mode press the MENU button
twice.
2. Press the navigation buttons ( )
repeatedly until „APL.FUNC" is displayed.
3. Press PRINT
4. Press the navigation buttons ( )
repeatedly until „SG" is displayed. To
confirm, press TARE, "SET" followed by
your current setting will be displayed.
5. Press the navigation buttons ( )
repeatedly until „SG HOLD" is displayed.
Confirm with TARE.
The indicator shows that the data hold
function has been enabled.
6. To return to density determination mode,
press ON/OFF repeatedly.
6.2

Hold / delete result of density determination on display

 To carry out density determination, see chap.4.2 /step 6 or chap.5.3 /step 4.
"WAIT", will be flashing for about 5 sec whilst weighing balance is determining
density.
[∗] indicates the recorded density.
 To delete the retained display value, press the UNIT key. The balance returns to
density determination mode.
16 ACS-A03-BA-e-1210