Calculate Density - KERN ACS-A03 Operating Instructions Manual

4.2

Calculate density

1. Check that "density determination solid
matter" mode is enabled (See chap. 4.1).
2. If weighing balance does not show Zero,
press TARE.
3. Put solid matter in top sample tray. The
weight of the „sample in air" is displayed.
4. Wait until stability display ( ) appears, then
press UNIT. "SINK" will be shown.
5. Put solid matter in lower sample tray and
press UNIT.
6. The weighing scale first determines, then
displays the solid matter's density.
7. If you connect an optional printer you can
print the result.
8. Remove the sample. To carry out further
measuring, press UNIT, and then start with
step 2.
Printout example KERN YKB-01N:
ACS-A03-BA-e-1210
KERN & Sohn GmbH
TYPE ACS 320-4
SN WB11AG0002
ID 1234
1.2188DS
-SIGNATURE-
- - - - - - - - - - - - - - - - -
Company
Model
Serial no.
Balance identification no.
Result
prepared by
11