Display Gross Weight Value; Open Pre-Tare Settings; Carry Out Data-Hold Function - KERN FKB Operating Instructions Manual

Table scales

Hide thumbs Also See for FKB:

Table of Contents

Enable another unit:

For the required settings of an application unit (%, FFA) selection, please see

chap. 10.4.2 and 10.4.3.

8.5.2 Display gross weight value

As per standard the change-over button

gross weight value by long-time pressing.



As per standard the F-key is set so that the menu setting < Ptare> is invoked by

pressing the key shortly. Further settings, see chap. 10.2.

As per standard the F-key is set so that the Data-Hold function < hold> is exe-

cuted by pressing the key for a long time, see chap. 10.3.

 Select menu setting < unit> and confirm on ➔

button.

 Wait until the display flashes.

 Use the navigation keys  to select the weighing

unit and confirm on ➔ button.

is set so that is it possible to display the



Keep the

button pressed until the display

shows the gross weight value.

After releasing the button, the gross weight value

will be kept in the display for a short time.

TFKB-B-BA-e-2311

Table of Contents

Tfkb-b