Calculate Density - KERN ACS-A03 Operating Instructions Manual

5.3

Calculate density

1. Pour test fluid into glass container.
Check that "density determination fluid"
mode is enabled (See chap. 5.2).
2. If weighing balance does not show Zero,
press TARE.
6. Suspend the glass sinker. The weight of the
drop shaft in air will be displayed.
7. Wait until stability display ( ) appears, then
press UNIT. "SINK" will be shown.
3. Put glass container with test fluid onto pan.
Immerse glass container completely in the
fluid, trying to avoid bubble formation. Press
UNIT.
4. The weighing balance will first determine
then display the fluid's density.
5. If you connect an optional printer you can
print the result.
Printout example KERN YKB-01N:
For further measurements
 Clean and dry container and glass sinker carefully.
 Suspend again the glass sinker
 Press the UNIT-key
 Start with step 2
ACS-A03-BA-e-1210
KERN & Sohn GmbH
TYPE ACS 320-4
SN WB11AG0002
ID 1234
0.1109DL
-SIGNATURE-
- - - - - - - - - - - - - - - - -
Company
Model
Serial no.
Balance identification no.
Result
prepared by
15