Call Up "Density Determination Fluid - KERN ACS-A03 Operating Instructions Manual

5.2

Call up "density determination fluid"

1. Call up menu:
In weighing mode press the MENU button
twice.
2. Press the navigation buttons ( )
repeatedly until „APL.FUNC" is displayed.
3. Press PRINT
4. Press the navigation buttons ( )
repeatedly until „SG" is displayed. To
confirm, press TARE, "SET" followed by
your current setting will be displayed.
5. Press the cursor keys ( ) repeatedly
until "L.DENS" ("density determination fluid"
mode) appears. Confirm with TARE. "SET",
followed by the display used to enter the
drop shaft volume will appear.
6. Press TARE and the display will change to
numeric data input.
# indicates that the weighing balance is in
numeric input mode. The first digit is
flashing and can be changed.
Using the cursor keys, enter the drop
shaft's volume (See chap. 5.1).
Numeric entry

Increase flashing digit

Decrease flashing digit

Digit selection to the right
Confirm entry
7. The weighing balance will show "SET" for
about 3 sec. after which it will change to
"density determination fluid" mode.
To change from density mode  to weighing mode press MENU for 3 s.
14 ACS-A03-BA-e-1210