Installing The H-Udi Port Connector On The User System; Pin Assignments Of The H-Udi Port Connector - Renesas E200F User Manual

2.4

Installing the H-UDI Port Connector on the User System

Table 2.2 shows the recommended H-UDI port connectors for the emulator.
Table 2.2 Recommended H-UDI Port Connectors
Connector Type Number
36-pin connector DX10M-36S
DX10M-36SE,
DX10G1M-36SE
Note: When designing the 36-pin connector layout on the user board, do not connect any
components under the H-UDI connector.
2.5

Pin Assignments of the H-UDI Port Connector

Figure 2.11 shows the pin assignments of the 36-pin H-UDI port connectors.
Note: Note that the pin number assignments of the H-UDI port connector shown on the
following page differ from those of the connector manufacturer.
Section 2 Connecting the Emulator to the User System
Manufacturer
Hirose Electric Co., Ltd.
Specifications
Screw type
Lock-pin type
Rev. 4.00 Feb. 18, 2009 Page 19 of 64
REJ10J1662-0400