Initial Setup - Denso BHT-1361QWB-CE Hardware User Manual

BHT-1300-CE Series

2.4 Initial Setup

Press the power key to turn ON the BHT.
When turning ON the BHT for the first time or after a long period of time, perform a "full reset" at first if the dialog box is
not displayed.
Refer to "Chapter 2 BHT Preparation" – "2.6 R
Press the power key to turn ON the BHT.
 No tes 
The following screen is displayed at the start of the BHT.
BHT started
(After power ON, reset or full-reset)
20
esetting and Full Resetting" for details of the full reset method.
Displaying the scre en may take time after pressing the
power key, but this is not a malfunction of the BHT.
Do not keep pressing the power key more than needed o
press it too hard.
Failure to follow this instruction may cause breakage or
malfunction of the power key.
r
OS startup completed
(Desk top screen)
Power key