Replacing The Battery Cartridge; Battery Cartridge Service Life; Battery Cartridge Replacement Method - Denso BHT-1361QWB-CE Hardware User Manual

BHT-1300-CE Series

5.1 Replacing the Battery Cartridge

5.1.1 Battery Cartridge Service Life

The battery cartridge is a consumable part and should be replaced after being charged approximately 300
times.
The performance of the battery cartridge's lithium-ion battery will deteriorate gradually with repeated
charging, even during normal use. When the battery operation time becomes shorter even after charging
for the specified length of time, replace the battery with a new one.

5.1.2 Battery Cartridge Replacement Method

1.
Press the power key ( ) to turn OFF the BHT power.
The screen on the right displays.
 Caution 
2.
Slide the battery cartridge cover release button (1) in the direction indicated by the arrow and
remove the battery cartridge cover (2), and then remove the battery cartridge (3).
3.
Check the battery cartridge terminals on the new battery cartridge and then insert in the direction
shown by the arrow.
Refer to "Chapter 2 BHT Preparation" – "2.2 Loading and Charging the Battery Cartridge".
 Caution 
42
Do not remove the battery cartridge until the
power turns OFF and the screen display clears.
Do not use battery cartridges other than that specified by DENSO WAVE.
Terminals