Table of Contents
Advertisement
Network Camera (Wired LAN) Settings
Changing a Password
You can change the password to one of your
own choosing.
It is recommended that you change the
passwords whenever possible for security
purposes.
Passwords can consist of between 4 and 8
alphanumeric characters.
1
Delete the current password ("3333") in
the password column for ID3, type "1234"
as the new password for ID3, and then
click the [SET] button.
The following window will be displayed.
Check that the details are correct, and then
close the window.
(Setting change confirmation screen)
2
Turn the camera back on.
When the network password entry screen is
displayed, check the username and type in
the new password ("1234") in the password
column for ID3.
English
Viewing Live Images Without
Typing In a Username or
Password
You will be logged in at user level "ID1".
Be very careful not to forget the password for
ID3 (Administrator). If you forget this password, it
will no longer be possible to change settings.
1
Delete the password in the password
column for ID1, and then click the [SET]
button.
The following window will be displayed.
Check that the ID1 password is blank, and
then close the window.
2
Turn the camera off and then back on
again.
A single-image live image screen will be
displayed.
Note:
If the ID1 password is blank, the login will
always be for the User access level.
To return to normal password entry, type in a
password for ID1 (example: 1111).
– 23 –
Advertisement
Table of Contents
