Table of Contents
Advertisement
Alarm Settings
5
ALARM MODE
This selects what combination of external alarm
and motion detector is to be used to provide
alarm input. Make this setting when "EXTERNAL
ALARM" is set to either "NC" or "NO" or
"MOTION DETECTOR" is set to "ON".
6
ALARM OUT
This is used to make settings for a device such
as a buzzer that is connected to the ALARM
OUT terminal at the rear of the camera when an
alarm is input.
7
ALARM OUT MODE
You can set alarm signals to be output for the
time specified by the ALARM OUT TIME setting
(specified by time) or continuously (REMOTE)
from the ALARM OUT terminal at the rear of the
camera, regardless of the actual alarm detection
status.
When set to "REMOTE CONTROL", the
REMOTE ALARM indicator is displayed in the
initial screen.
8
ALARM OUT TIME
This sets the alarm duration when the external
alarm or motion detector detects an alarm, or
when the REMOTE ALARM indicator is pressed
when using the remote function.
English
9
ALARM SOUND MODE
This setting causes an alarm warning to sound
when an alarm is detected. If set to "USE",
"BEEP OFF" appears in the initial screen when
an alarm is detected at the same time as the
alarm buzzer sounds. If you click this indicator,
the alarm buzzer will stop.
F
ALARM BUFFERING
Set to "ON" to record alarm recording images
into the camera's internal memory, and then
click the [DETAIL] button. The ALARM
BUFFERING SET screen will be displayed so
that you can make detailed settings.
G
ALARM DURATION
If "FIXED" is selected, data is recorded
continuously until the selected record size in the
internal memory is reached. Furthermore the
"CC" setting allows data to be recorded in the
internal memory up to the specified size.
Note: Select "CC" if the alarm should be
detected only by the external sensor.
Select "FIXED" only if the alarm should be
detected by the motion detector.
H
ALARM NOTICE (SMTP) SET
The first alarm image generated when an alarm
is detected can be sent to a specified e-mail
address.
Use the ALARM NOTICE (SMTP) SET screen to
make the required settings.
– 37 –
Advertisement
Table of Contents
