Sanyo NETWORK CAMERA VCC-WB4000P Instruction Manual page 27

CLOCK SET Settings
4
DAYLIGHT SAVING MODE
The daylight saving settings are displayed when
"USE" is selected from the drop-down list box.
Available settings:
NO USE: Daylight saving is not used.
USE: Daylight saving time is used.
When set to "USE", you can then set the
times for daylight saving to be applied.
5
SYNC. WITH NTP SERVER
This lets you standardize the time settings with
high precision.
This setting requires an NTP server that is
accessible over the Internet or within your local
network.
When synchronizing the time with an NTP
server, click the [DETAIL] button and make the
settings in the NTP SERVER SET screen. (p. 27)
6
DAYLIGHT SAVING
When the set date and time is reached, the
camera's time automatically changes from
standard time to summer time. You need to set
the start time (ON) and end time (OFF) for
summer time.
WEEK ... Sets the week and weekday.
Available settings:
Week: 1ST, 2ND, 3RD, 4TH, LST
Day: SUN, MON, TUE, WED, THU, FRI, SAT
MONTH ... Sets the start month and end month
for summer time.
TIME ... Sets the hours and minutes.
– 26 –
English