Modems; Udl Software; Connecting Rs232 To The Panel - Pyronix EURO 46 V10 Installation Manual

Modems

There are 6 modems there are compatible with the EURO 46 V10 panel. These are:
• DIGI WIFI/XA
• DIGI LAN
• DIGI GPRS
• DIGI GSM
• DIGI 1200
• DIGI PSTN/VOICE
For installation instructions please refer to the manual provided with the modem.
For programming instructions please refer to the 'Communications Guide'.

UDL Software

The EURO 46 V10 control panel can be programmed by the LCD menu or the UDL InSite Software,
provided free of charge. It can be downloaded from https://www.pyronix.co.uk/help-and-support/
installers-distributors/insite-software-download/insite-software-download. The connection between
control panel and UDL software can be done in the following ways:

Connecting RS232 to the Panel

Enter the Engineer Menu.
Scroll the menu ( button) until the 'SET UP DOWNLOADING?' and press .
Choose RS-232 in the "Download by" option – Press .
Now on the 'UDL Password' screen, leave 'blank' and Press .
Now on the 'Site Name' screen, this is compulsory, make sure that you take a note of it for use later in
the InSite software then press .
Now on the 'UDL Priority' screen – we recommend setting this to 'High [0]'.
PLEASE NOTE: This prevents HomeContol+ App events / notifications from disconnecting the UDL
connection.
18
COM PORT
A USB/Serial converter is available from
Pyronix
EURO 46 V10 Installation Manual
PC