Communication Loom
The ATE (Alarm Transmission Equipment) outputs are programmed in the Engineer Menu. The
programming can be found in 'CHANGE OUTPUTS' then sub menu 'Endstation Outputs'.
Normal Status:
5v
Active Status:
0v
Current:
2mA
PLEASE NOTE: The polarity of the ATE outputs can by changed in the Engineer Menu. The menu
option is named 'Invert ATE O/Ps' and can be found as a sub menu in 'SYSTEM OPTIONS' then
'Site Options'. This will invert the polarity of all the programmable ATE outputs, they cannot be done
individually.
EURO 46 V10 Installation Manual
11