Top Control - Sanyo PLC-XU75 Owner's Manual

Part Names and Functions

Top Control

Top Control
SELECT button
q
– Execute the selected item. (p.0)
– Expand or compress the image in Digital
zoom mode. (p.34)
POINT (
ed7 8
w
– Select an item or adjust the value in the
On-Screen Menu. (p.0)
– Pan the image in Digital zoom + mode.
(p.34)
– Adjust the volume level. (Point
buttons) (p.3)
KEySTONE button
e
Correct the keystone distortion. (p., 4)
POWER indicator
r
Emit a red light until the projector gets
ready to be turned on. It turns red when
the projector is in the stand-by mode. It
remains green while the projector is under
operation. (p.18, 19, 61)
10 10
10
y
u
i
o
) buttons
LAMP REPLACE indicator
t
Turn yellow when the life of the projection
lamp draws to an end. (p.55, 61)
WARNING Temp . indicator
y
Emit a red light when the projector detects
an abnormal condition. This also blinks
red when the internal temperature of the
projector exceeds the operating range.
(p.5, 61)
7 8
POWER ON/STAND-By button
u
Turn the projector on or off. (p.18, 19)
INPUT button
i
Select input source. (p.5, 35, 36)
MENU button
o
Open or close the On-Screen Menu. (p.0)
t
r
e
w
q