Sanyo PLC-XU75 Owner's Manual page 40

Video Input
Sharpness
Press the Point button to soften the image and the
7
Point button to sharpen the image. (From 0 to 15.)
8
Gamma
Press the Point buttons to obtain better balance of
7 8
contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced.
Select one of the following to get smoother images.
Off . . . . disabled.
L1 . . . . . lower reduction
L . . . . . higher reduction
Progressive
I n t e r l a c e d v i d e o s i g n a l c a n b e d i s p l a y e d i n a
progressive picture. Select one of the following.
Off . . . . disabled.
L1 . . . . . Select "L1" for an active picture.
L . . . . . Select "L" for a still picture.
Film . . . Select "Film" for watching a film. With this
function, the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments returns to their
previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point buttons and press the SELECT button. A
ed
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 38.
Quit
Exit the Image Adjust Menu.
Note:
✔
Noise reduction and Progressive cannot be
selected when 480p, 575p, 70p, 1035i, or 1080i
is selected. (p.37)
40
Store item
Image Level Menu
Move the red framed pointer
to an image item to be set
and then press the SELECT
button.
The confirmation box
appears and then select
[Yes].