How To Operate The On-Screen Menu 0 - Sanyo PLC-XU75 Owner's Manual

Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
1
Press the MENU button to display the On-Screen
Menu.
2
Press the Point
to adjust and press the Point
an item to adjust.
3
Press the SELECT button to show the item data.
To adjust the data, press the Point
Refer to the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again.
Note:
✔
The selected item is not active until the SELECT
button is pressed.
20
0
buttons to select a Menu icon
7 8
buttons to select
ed
7 8
Top Control
MENU button
buttons.
Remote Control
SELECT button
On-Screen Menu
Pointer (red framed )
Press the Point
move the pointer.
Item
Quit
Exit this menu.
POINT buttons
(outer ring)
SELECT button
MENU button
POINT buttons
Menu icon
Pointer
Menu bar
(red framed )
buttons to
ed
SELECT
button
Item data
Press the Point
7 8
buttons to adjust the
value.