Sanyo PLC-XU75 Owner's Manual page 33

Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom"
is displayed on the screen for a few seconds and then
the Aspect dialog box appears.
Scale H/V .................. Adjust the Horizontal/Vertical
H&V ........................... When set to "On", the aspect
Position H/V............... Adjust the Horizontal/Vertical
Common ................... Save the adjusted scale to all
Reset ......................... Reset the all adjusted values.
screen scale.
ratio is fixed. The "Scale V"
appears dimmed and becomes
unavailable. Adjust the "Scale
H", then the screen scale is
automatically modified based
on the aspect ratio.
screen position.
the inputs. Press the SELECT
button at Common to display
a confirmation box. To save
the scale, press the SELECT
button at "Yes", When Custom
is selected, the saved scale is
used.
Press the SELECT button at
Reset to display a confirmation
box. To reset, press the
SELECT button at "Yes".
Computer Input
Press the SELECT
button at Common
or Reset, to display a
confirmation box.
Note:
✔
• W h e n n o s i g n a l i s d e t e c t e d ,
"Normal" is set automatically and the
Aspect dialog box disappears.
• The adjustable range for Scale
H/V and Position H/V is limited
depending on the input signal.
33