Pin Code Number Memo; Lamp Replacement Label - Sanyo PLC-XU75 Owner's Manual

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you
forgot or lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Logo PIN Code Lock No.
While the projector is locked with the PIN code....
Put the label below (supplied) on in a prominent place of
the projector's body while it is locked with a PIN code.

Lamp Replacement Label

When using the projector ceiling-mounted, put the Lamp
replacement label (supplied) on in a prominent place of
the projector's body to check the Replacement Lamp
Type Number.
66
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be
changed, the factory set number
will be invalid.
Lamp Replacement Label