Image Level Selection - Sanyo PLC-XU75 Owner's Manual

Computer Input

Image Level Selection

Direct Operation
Select an image level among Dynamic, Standard, Real,
Blackboard (Green), Image 1, Image 2, Image 3, and
Image 4 by pressing the IMAGE button on the remote
control.
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This mode assists to enhance the image
projected on a blackboard. This is mainly effective on
a green colored board, not truly effective on a black
colored board.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.32)
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Image Select Menu icon.
2
Press the Point
framed pointer to the level that you want to set and
then press the SELECT button.
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.32)
30
30
buttons to move the
7 8
buttons to move the red
ed
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Select Menu icon
Image Select Menu
Move the red framed
pointer to the level and
press the SELECT button.
The level being selected.