Condiments; A) Dependent Condiment Plu - Uniwell HX-4500 Operation Manual

2-20. Condiments

A condiment PLU is a supplementary item subject to a main PLU. It is usually sold together with a main PLU.
Condiment PLUs are organized into condiment groups which are linked to normal PLUs. Max. 255 groups are
programmable with up to 50 condiment PLUs included in each group.
A maximum of 5 condiment groups can be linked to a PLU so that 50 condiment PLUs of each group are
automatically displayed for selection when the PLU is registered.

a) Dependent condiment PLU

Normal condiment PLU is sold together with a main PLU.
1. For example, PLU "FILLET STEAK" linked to condiment group 1. Condiment group 1 contains condiment
PLUs "MUSHED POTATO", "FRIED POTATO", "STEAMED POTATO", "CORN CHIPS" and "HOUSE
SALAD".
2. Press PLU "FILLET STEAK". Then the screen is automatically showing the condiment PLUs, thus
prompting the clerk to ask the customer to select an option.
3. Choose an item by pressing a CONDIMENT PLUs in CONDIMENT GROUP. The quantity counts up by one.
OK button will not appear until minimum number of condiment PLUs are selected. In order to exit from
Condiment screen, press Cancel button. If Multiple PLU with individual condiment setting = Yes (Condiment
group list is shown as many times as multiplication) in PLU System Option, press Cancel All.
Note:
When condiments are selected with a "qty" in minimum and maximum and if the following setting is enabled, then,
the POS will automatically exit the Condiment entry screen, without the need to touch "OK".
Program > PLU > PLU System Option >
Condiment entry screen is closed automatically if max. is reached
However, this setting is not valid if the Condiment is linked to a PLU and max. value setting is "0" in any of the
Condiments.
Regarding 2:3
2: Minimum, 3: Maximum
(in case of 0:0, no limitation)
QTY
number of selected PLUs is less than the
minimum qty.
34
is displayed (with red background) if the