Ejf View Shows Stored Track And Can Be Searched By Date And Time (V2.80) - Uniwell HX-4500 Operation Manual

3-40. EJF view shows stored track and can be searched by date and time (V2.80)

In the previous versions, EJF View only shows tracks closed by media. From this version, stored tracks are also
shown depending on a newly-added flag setting. Also, search by date and time is possible. Printing the
displayed transaction by buffer print function is available as before.

Program
Program > System > System Option > EJF >

Operation
[CLERK] - [EJF VIEW] - (Select Closed/Stored Block *1)
-> (Enter Start Date *2) - (Enter Start Time *3) - (Enter End Date *4) - (Enter End Time *5)
*1 This window is displayed if "Stored track can be shown at EJF View" is enabled.
*2 If Cancel is selected at this timing, Full EJF view is shown.
*3 If start time is not entered, "00:00" is set (ex. 2016/10/25 00:00).
*4 If Cancel is selected at this timing, EJF data is displayed with the entered start date/time and the
current date/time as "End" date/time.
*5 If end time is not entered, "00:00" is set (ex. 2016/10/25 00:00).
1. Clerk sign on.
2. Press "EJF View".
3. Select "Closed track" or "Stored track".
4. Select Start Date (can be skipped; "today" is selected as default. In this operation example,
"2016/10/23" is selected but the screen is changed to "Start Time" setting immediately after date
selection).
"Date From"
(V3.20~)
Stored track can be shown at EJF View
EJF View is searched by date & time
203