Destination Operation With Price Level Shift; Destination Operation With Menu Level Shift; Destination Operation With Kp Level Shift; Mode Selection For Destination - Uniwell HX-4500 Operation Manual

- Destination operation with Price Level shift

The price level of items entered with DESTINATION keys can be programmed in Price Level in Program >
Others > Destination. Then you will see the sales amount of items sold of each Destination respectively on the
PLU price level 1 ~ 7 in PLU sales reports.

- Destination operation with Menu Level shift

Menu level shift by DESTINATION keys can be programmed in Menu Level in Program > Others >
Destination.

- Destination operation with KP Level shift

In addition to the normal KP selection, when items are entered with DESTINATION and the transaction is
closed, they are automatically transferred to and printed on the KP programmed in KP Level in Program >
Others > Destination. When KP Level is set to (no change), KP items with DESTINATION mode are printed
on the normal KP selection.
Note: When KP REDIRECT key is used to send the items to KP, the selection in the above is disregarded and
the items are printed on the KP of the specified KP level.

- Mode selection for Destination

< Per Machine >
When a clerk is signed on, ECR gets into one of selected modes automatically by the Default destination setting
in Program > Others > Destination > System Option. It is possible to change the mode by pressing
DESTINATION key, even after the track is stored.
< Per Clerk >
When clerk signs on, ECR automatically changes one of programmed Destinations in Program > Clerk > Clerk >
General > Destination. This setting overrides "Per Machine" setting.

- Automatic tax shift by Destination

According to the way of consuming – eat in (in a restaurant), take out or delivery, the different taxes should be
charged. In order to support this, there are the following settings:
Program Options
Program > Others > Destination > Tax1 shift to Tax3 / Tax2 shift to Tax4
Notes:
- When one of these flags is selected, tax to be assigned to a PLU are limited to Taxable 1 and 2 because Taxable 3 & 4
are reserved for the above tax shift.
- When Adjustment and % are used with this function, set the flags of respective taxable setting.
- When "GST Tax System" (Tax > Tax > System Option > GST Tax) is selected, automatic tax shift settings are
116