Serial / Tcp-Ip Loyalty & Room Function Supported - Uniwell HX-4500 Operation Manual

3-32. Serial / TCP-IP Loyalty & Room function supported
Serial / TCP-IP Loyalty & Room functions are now supported.
Common program for Loyalty/Room
Configure > External Device > Loyalty & Room
MUST One of Serial/Ethernet (TCP-IP)/Remote must be selected in this screen.
Notes:
- If communication with PC is done via Master ECR, select "Remote", and enter Master ECR ID in "IRC ID".
- In case Loyalty & Room function is used, disable "Loyalty System" in Program > Others > Loyalty.
- Barcode is also available for customer identification (V1.90~). If a following barcode is scanned, the
Loyalty/Room number is sent to the PC server as Track 2 data, together with other card data.
Card format for Loyalty & Room
- Card data for Loyalty & Room is max. 20 digits.
- HX reads Card data and just sends it to PC application without modification. Card data format can be
defined at PC application.
- Room cards which were used with DX/TX/SX/QX can be used with the following format.
33=bbbbrrrrrr (33: Room card ID, =: field separator, bbbb: branch number, rrrrrr: room number)
Common notes for Loyalty/Room
- Automatic % calculation (as Subtotal % only) is possible for TCP Loyalty & Room.
- Re-open operation is not possible for the transactions closed by Loyalty/Room Media or Room key.
Program for Loyalty
Media-related
Media type
Payment > Media > Type
Media option
Payment > Media > Option
Print-related
Print option
System > System Option > Loyalty &
Room
Print Format
Print > Print Format
(*1) If this setting is enabled, point is automatically used for payment if the previous loyalty point is not
zero, and other media can be used for closing when point is in short.
(*2) If this setting is enabled, only loyalty media is allowed if the previous loyalty point is not zero. Once
the loyalty point becomes zero, non-loyalty media can be used for closing.
(*3) If this setting is disabled, auto buffer print depends on Receipt ON/OFF condition. However, final
receipt might be printed depending on the status from PC application, even under receipt OFF
condition.
(*4) If this setting is enabled, loyalty point is printed with punctuation, with punctuation symbol and
position of the loyalty media.
Setting
MUST Loyalty
Loyalty media is pre-paid (*1)
Only Loyalty media is allowed if loyalty point remains (*2)
RELEASE ONLY LOYALTY MEDIA CONDITION is disable
Display loyalty updated balance
Auto buffer print on loyalty closing even if R-OFF condition (*3)
Loyalty point printed with punctuation (*4)
Loyalty Account
Loyalty & Room Text
183