Waste Function - Uniwell HX-4500 Operation Manual

3-38. Waste function

It is used for the registration of PLUs which are considered "Waste", such as cooked PLUs which were dropped
on the floor or PLUs cooked in advance but were not served within their use-by time. Wastage function is also
necessary for inventory control and it shows the waste count in the PLU sales count and amount.
Manager does the WASTE operation at the timing of shift change and store close. Wasted items are printed on
the Auto Full/Full transaction, clerk and PLU reports.
Program
Display > Screen Layout > WASTE
Clerk > Security Level > Sales > WASTE
Print > Print Format > WASTE
Print > Print Format > WASTE TOTAL
For the print of "WASTE" operation, "Final Receipt" format is used.
In case "Copy print" should be used, "Buffer Print" format should be programmed as well.
[Print item "WASTE"]
[Print item "WASTE TOTAL"]
NEW!
NEW!
NEW!
NEW!
199